##
EE 212 Lab

###
Prelab 4: Step Responses of RC and RLC Circuits

1. Determine and plot the step response (v_{out}(t) for
v_{in}(t) = u(t)) of the circuit shown in figure 1 of the lab. Start
your table of metrics with values obtained from your calculated step response.

2. In part 2 of the lab, the series RLC circuit shown in figure 3 is desired
to have a damped sinusoidal step response. Choose R, L, and C so that the
specifications of the lab are met. Determine and plot the step response
(v_{out}(t) for v_{in}(t) = u(t)). Start your table of metrics
with values obtained from your calculated step response.

Here is a MATLAB m-file to use as a starting point
for plotting the solution to this problem.