Monday, June 14
Lecture Topics:
Classroom Work:
-
Battery connections
-
Solder red fuse housing wire to positive battery terminal
-
Solder four black wires (ground wire from regulator connector, 4" charger
ground, 8" H-bridge ground, 12" HC12 ground)
-
Electrical tape over battery terminals
-
High power (12V) single pole, double throw switch connections
-
Solder other red fuse housing wire and regulator red wire to center post
-
Solder ~3" red wire between charger plug and one side post
-
Low power (5V) single pole, double throw switch connections
-
Solder white wire from regulator connector to center post
Notes:
-
remember to shrink wrap all solder connections